Vennligst vent...
Produktet ble lagt i handlekurven. Se handlekurven her
Tom handlekurv

BLAZE Audio PowerZone Connect 122 EU 2x60W 4-8 Ohm 1x125W 100V 16 Ohm

Forsiden LYD Forsterker 2-kanals BLAZE Audio PowerZone Connect 122 EU 2x60W 4-8 Ohm 1x125W 100V 16 Ohm
Du må logge inn for å handle/se priser.
BLAZE Audio PowerZone Connect 122 EU 2x60W 4-8 Ohm 1x125W 100V 16 Ohm (UBX-888-004)
BLAZE Audio PowerZone Connect 122 EU 2x60W 4-8 Ohm 1x125W 100V 16 Ohm (UBX-888-004)
BLAZE Audio PowerZone Connect 122 EU 2x60W 4-8 Ohm 1x125W 100V 16 Ohm (UBX-888-004)
BLAZE Audio PowerZone Connect 122 EU 2x60W 4-8 Ohm 1x125W 100V 16 Ohm (UBX-888-004)
BLAZE Audio PowerZone Connect 122 EU 2x60W 4-8 Ohm 1x125W 100V 16 Ohm (UBX-888-004)
BLAZE Audio PowerZone Connect 122 EU 2x60W 4-8 Ohm 1x125W 100V 16 Ohm (UBX-888-004)

BLAZE Audio PowerZone Connect 122 EU 2x60W 4-8 Ohm 1x125W 100V 16 Ohm

Varenr.:
UBX-888-004
EAN:
5745000268061

2x60W 4-8 Ohm 1x125W 100V 16 Ohm
  • Type Forsterker
På lager
Beskrivelse

  • The PowerZone Connect 122 is a compact DSP amplifier in a half rack, 1U format. It’s network-connected, giving wired or wireless access to the PowerZone Control web app’s system setup and audio configuration menu. From here you can manage inputs/outputs, control sound zones and access professional tuning settings – helping to achieve impressive sound in the shortest time.

    It can drive both conventional low impedance (4O to 16O) loudspeakers and constant voltage (70V/100V) transformer coupled loudspeakers. With four analogue inputs, and one stereo digital input, it has flexible output options – 2 x 60W in Lo-Z mode and 1 x 125W in Hi-Z mode. Automatic power sharing technology enables total available power to be shared proportionately between the outputs.

    Full Matrix DSP amplifier with configuration and control via the simple WebApp
  • Flexible power output with 2 x 60W / 1x 125W and power sharing technology
  • Route any input to any output channel – create sound Zones in minutes
  • Ultra-compact form factor means it can be installed in spaces where others cannot
  • Powered by Pascal UMAC™ Class-D technology

Total System Power 125 W
Output Power @ 4/8O 2 x 60 W
Output Power @ 70/100V* 1 x 125 W
Powershare (up to)
Across all channels** 1 x 125 W
Power Consumption 75W
Dimensions 44 x 220 x 213 mm
Weight 2kg

Output Circuitry UMAC™ Class D - full bandwidth PWM modulator with ultra-low distortion
Output Voltage 70Vp / 140Vpp (unloaded) // Bridged 140Vp / 280 Vpp (unloaded)
Signal To Noise-Ratio >106dB (A-weighted, 20Hz-20kHz, 8O load)
THD+N (typical) < 0.05% (20Hz-20kHz, 8O load, 3dB below rated power)
Frequency Response 20Hz-20kHz (+0/-0.25dB (8O load, 3dB below rated power)
Protection Circuits Short circuit -, DC -, Undervoltage -, Temperature - and Overload protection
Power Supply UREC™ universal mains switch mode power supply with Power Factor Correction (PFC) and standby converter
Operating temperature 0-40°C
Operating Voltage/Frequency Universal Mains, 100V-240V, 50Hz-60Hz
Standby Consumption < 0.5W
Accessories
2x Rack ears
1x ½ rack plate extension
2x ½ rack mounting
2x Rear supports
Power Ratings 1% THD @ 120Vac and 230Vac

Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.
© 2024 AVISTIC AS